Irwin

I have various Irwin tools my recent purchase was some spades bits a very large set of high quality bits was only £30 and comes in a very nice case they are really sharp and drill with ease I also use Irwin hand saws which again are very good for what they cost usually on offer somewhere the chalk line I have is very well designed although no matter what I do I struggle to get the line to hold much chalk but apart from that its a quality brand

I would only ever use Irwin saws as they last longer and seem sharper than any other make I have tried and their auger drill bits on hex drive have saved me so many hours running pipe work and so I highly recommend them to anybody.

Good solid company who provide good quality tools. Hand tools absolutely superb and know they will hold up to the task at hand. Readily available and at a good price

Great Quality products, tools made to last , very recognisable brand blue and yellow, from multi power grips to spirit levels and tape measures worthy tools to have in your tool box

I use the clamps daily so a great piece of my tool box makes fixing things so much easier, lots of different sizes of clamps, you can pick up good deals, recommend,

Absolutely love the Irwin QuickClamps.

Perfect for quickly clamping (go figure).

Had a few of these for five or six years. They do feel quite plasticky, but have lasted so it’s difficult to put it against the product.

Irwin have a great range of products from Stanley blades to tape measures always been really happy with the Irwin tools I have purchased in the past always good quality and always seem to last

I have had many tools from Irwin over the years. They have all held up well and very reasonably priced. My favourite tools from Irwin must be the mitre saw, chisel set and clamps. In my experience they are a good brand.

Got so many Irwin tools to name, from wire cutters to impact bit holders. Love the quality for the price. Never had an iddue with their stuff so not a bad word from me.

This kit is good. Especially their hand saws. Lovely action, clean cutting, sharp and some nice little design features that set them apart from others too. Their quick clamps are also brilliant. Wouldn't be without them.

Won’t but wood drill bits of any other brand. Durability won’t be beaten in my opinion. Have hacksaws and other pieces of Irwin. Quality built and reasonably priced.

Irwin have good quality knives and wood blades. These are the bees nees. Top of the range. Well made , top quality products. Good value for money. Great service

Irwin are quite a good brand. I have had a few are in tools over my career and I still may have some. I find them in between middle and top of the range for tools and I would recommend Irwin to anyone. A pretty good price and you can almost get them from anywhere. Thanks

I have only used a handful of Irwin hand tools but every one of them has been spot on, they are a great price and have an amazing product range, you can find almost any hand tool for a great price and great quality if you looks at their product lines.

With Irwin I have only really used a few of there products and have never really had any issues. They a built to there price range and do the job at that range well. They are my go too for some products as they are cheap enough and reliable enough for what I need them to do.

A good quality brand that always delivers the very best of tools and accessories make sure to have a look at many of there products you won’t be disappointed

The Irwin utility knifes and blades are excellent. The blades stay sharp for longer and can take a lot of punishment.
The utility knifes are easy to operate

All of there clamp range is really good they have a good variety and have never had a problem with them I lol how light they are when you only have one hand to clamp heard there chisel set is good aswell

Irwin's stubby auger bits are brilliant. I do a lot of pipe and cable running through 300mm centre stud wall getting traditional bits in between the studs even with an angle drill is difficult, not with these. They can be sharpened and will run a line of holes in studs in minutes. They're quick clamps are excellent unlike other manufacturers quick clamps that couldn't hold anything together. They're chisels take a very good edge when sharpened with diamond stones demonstrating good quality steel is used in their manufacture.

The Irwin brand alone says quality and a great price. Their chisel sets are great value for money that come in a neat carry case (in most cases).

I’ve used many tools from Irwin, and I’m mostly satisfied. Can not fault the vise grip snips and pliers at all, they’ve lasted me years, only recently upgraded. I had a pack of the flat wood bits, can’t say I was too impressed, would’ve expected them to last a little longer.

I think the brand speaks for itself, if you need a saw you go and get an Irwin there’s no questioning that, was happily surprised by the pliers they make as well as the auger bits, fairly cheap but they get the job done

Excellent tools had a nut extractor and it has never let me down even getting the most stripped heads out. Have many molegrips and clamps would not use another brand

There chisels are fantastic I have always used and been a big fan and user of there chisels they have always been a must in my maintenance tool bag u can’t beat the Irwin marple range even my work colleagues use the Irwin mar plea range

A great range of cramps, clamps, grips and drill augers. You won’t go far wrong using these quality products. Mine have all lasted for many many years with no problems. Professional tools for the tradesman.

Irwin Marples chisels used most days recently over a two week period. I’ve been loaned a set from a relative who’s had them a long time. I have to say they are excellent. Great quality, very well built. Highly recommend.

Irwin grips are unbeatable. So easy to use and very strong, the only downside is the thin paint in the metal work. If working in damp conditions like outside then these can rust up easily meaning it becomes harder to slacken them off. This did not put me off as bought many more of them for the workshop.

Ive always used irwin marples chisels, wouldn't use any other brand now. Their saws, pliers, and other hand tools are also well up for the job. Also a great range of drill bits and other power tool accessories

Only own the Irwin flat bjt set but they are brilliant. Really well priced and better than any other more expensive brands I have tried. Will be looking to expand my Irwin collection

I have the speed clamps, drill bits and screwdriver bits as well as chisels and i cant fault irwin at all. Top quality brand and generally good on price. I also have vicegrips, the original and best, they are unbeatable and get used all the time.

Great quality saw for the price. I’ve used them for years and never had an issue with them. They leave a great cut for the price. The have a good range of rough and fine cut saws.

I've had several Irwin saws over the years and can't fault them. I've bought standard tooth and fine tooth saws to use on different jobs and they cut various wood products easily and always leave a smooth clean cut

Great saws at a reasonable price, keep checking scref fix for great deals as usually included in all of there sales. Have many different saws with many

Trying to leave a review of the Marples chisels, now known as Irwin marples. I’ve had mine for over 25years, they hold a great edge and make my job much easier. When I bought mine the handles have a lifetime guarantee and will be swapped if broken which I have taken advantage of twice. Great set of chisels that will last a lifetime of cared for.

They are a very competitive brand who I will use over and over again.
The chisels that I use are always of a good quality and stay sharp for ages before I have to re sharpen. Never had any issues, I have also got hand saws and clamps too and they are top procures too

Brilliant brand with great tools wouldn’t use anything else. They don’t feel cheap, would be lost without these tools everyday. Great value for money with massive savings to be found. Customer support is 10/10 emails answered quick and efficiently!

Hand saw is first class saw the only trouble is that thay do not stay sharp for long when using wet treaded timber. But using the saw in soft wood they are perfect.

Really good all round products my college used them back when I was in training and I liked them a lot good quality but not as good as other power tool brands

I seem to go straight back to Irwin to any day or clamps I may use in my day to day work. These products are very reasonable when it comes to price but not that you could tell when it comes to the quality of the products

I have a small but effective range of Irwin tools. The go to tools are the reverse twist bolt / nut removal sockets. Working on cars I regularly come across rounded or damaged fasteners and these are a godsend and serious timesaver.

I have some of their clamps which I’ve had a long time. I find them great value for money and lasting a long time compared to other cheaper brands I’ve bought and had to replace

The go to brand for a day to day saw usually the orange handle perfect for the price and to cut many things also do some good chisels and perfect for knife also really good brand for what they do will continue to buy stuff with the Irwin brand on

Great hand tools quality and strong and exceptional value for money the marple chisels and strong and made from toughened steel lovely to sharpen all the time

Had many of the joiners saws with varying teeth grades. They have all done what are asked of them and seems to last good length of time. I'm no joiner but once they are well used on timber they come in handy for theromo blocks.

As a joiner I look for quality, I’ve found that the chisel range is hard to beat! Clean cuts and long lasting sharpness. I would definitely recommend

Been using Irwin products for donkeys years!
They are a very reliable brand across the board!
I mainly use the Irwin quick clamps every day and other the my own human error of the clamps getting wet an rusting they are fantastic!
Cut above other mid range priced clamps!!

Irwin have good products at charlatan prices, there range could be better tho, they clamps are are good and the products are durable , so I would recommend this product for professionals and diyers

Brilliant tools from the grips to there clamps I have never had a problem, and from day in day out wear there grips are still holding up like they were just opened up, would deff recommend this company without a dout

I do like Irwin tools a few products are brilliant but I am disappointed with some too haven't decided yet if it is brands they have bought over or just going into product they do not do in quality

Always had a ‘second’ set of cutters and pliers for the rough work but had them go wallows a few month ago. They are actually now my go to set, clean cuts every time and very little effort needed to use them efficiently

Not much choice but good value and reliable

Defo worth having a couple of grips around

To be fair their adjustable is built to last and got us out of tight spot before

I’ve used a few different Irwin tools and on the whole find them to be good quality. I have used they’re specialist sockets for removing rounded nuts and they are a life saver! May not be something you use every day but when you need them they are incredibly handy.

I only really use there hand saws and think they’re really good, definitely think there’s a little room for improvement, but are a high quality

Great bits of tools I have a fair few clamps there not the best but for the price it’s okay if I have to replace them often I’ve had a few with heads come off but I really do punish them

They are a good brand. Not the best but their tools are more than adequate. I use both the clamps - of which I use several types - and their chisel set. Both have lasted well considering the work required of them. In a market, where there’s so much competition, there’s no standout reason to buy Irwin over another brand. My reason for purchasing was that they were on the shelf and I thought ‘they look ok’.

Irwin do some brilliant cheaper value tools the quality is always good! Yes they’re both the best looking tools but they work really well. Massive value for money

Just a classic make and an all round tool make

Always flawless and just what you expect when you buy a tool your getting somthing that works and it durable

The quick clamps are fantastic, never realised the need for good quality clamps until I purchased my first pair of irwins! Will continue investing in there brand really happy so far

Good quality tools always reliable and never fails Wish they made more sockets as their tools or of that good of quality they are always helpful and always good value for money I’m my opinion

i have the irwin tool tote which is reasonably hard wearing as an electrician who his tools to be at hand for those little jobs i find this tote pretty easy and easy to carry some features could be improved but generally pretty good

Good product range with woodworking In mind.
Budget and premium range for various skill levels. Personally I have the marples and various clamps and saws also, that are brilliant, good look and feel.

Tough long-lasting tools. Always recommend. Grips have some good holding. Another item that I’ve had for a real long time are the wood chisels.
All over their tools are tops

Brought the irwin quick grip from one of the deals, really well made and amazing gripping power. Irwin build quality a1 as normal

Highly recommended

I’ve always had good luck with Irwin tools; at an affordable price the quality is excellent. They make a considerable amount of woodworking tools and a large amount of metalworking tools. Everything from chisels to drills come nice and sharp.

Irwin offer a wide range of products I own there hacksaw and a knife never had any issues reasonably priced great value and quality both have been in my bag for years

Good quality tools. good prices, vast selection. Being a mechanical engineer. Always a random tool needed to get the job done. Have been using since an apprentice and will continue to do so going forward!

Overall the tools are good for the price but nothing amazing.
The quick clamps are very good value especially the heavy duty ones.
Chisels are ok but they do require a fair amount of work to make them usable, backs needed flattening bevels needed correcting if you get the big set your in for a few hours worth of work to get them to a good standard.
Saws are fine they last a couple jobs there cheap and disposable.
Pretty good Powertool accessories if you get them for a good price.

Strong tools (chisels) sharp and very easy to maintain, stronger than some tools from China but on par with maples so use both brands. The robust handles don’t split or chip and great for site and workshop work.

Found them great everyone I know uses something they make even if it’s just a basic saw but also found the quality of these to top standard and not too overpriced

The only vice grips you’ll ever need or want. Completely in a league of their own. Would definitely recommend to any one in construction.

Did have some chisel set that was ok aswell but the grips are the one

This is an excellent product. I've owned a Makita combi drill and having a separate impact driver has been a blessing. It feels robust, works solidly (even after a 2m high drop), comfortable to use and very powerful. The bit changing is secure and the light powerful. I toyed with getting the brushless and/or programmable version, but this brushed version, even as an entry level for a Makita product, is perfect for building projects. So no regrets about choosing this one. I've even grown used to the colour, despite having had the black and white Makita drill. [In case it makes the difference, I've been using a 4.0Ah battery and mainly using Turbo Gold XT screws into pilot holes for soft woods, e.g. spruce) this

Got a pack of these grips and they are fantastic need to go and get some more as they are so handy. every thing you camp them on they hold fast

The irwin clamps are brilliant i have around 8 pairs when kitchen fitting or working with sheet materials i havent found anything better that does the same job lots of diffrent sizes to cater for diffrent applications

Hands saws and quick clamps from this brand are ideal, competitively priced, and excellent to use. The saws are good quality, and are always bang on, gone through a few over the years. The quick clamps are sturdy, have a decent length, and are straightforward to use.

Best hand saws, well ballanced and easy chisels (also very easy at sharpening ).Excelent clamps, quick and easy clamping and hold the workpiece verry well.

Love irwin tools their hand saws and chisels are excellent, long lasting and good quality there a must buy for anyone who wants to add items to their tool box

Great chisels, great knives all together great brand never had a problem with any tools I’ve picked up... the clamps are second to none, great gear

The best in the business for had tools and clamps been using this make for years now and haven’t come across better hand saws to be fair would highly recommend any one to use there products

Irwin the makers of hand saws and the best chisles in the world. Ive had my chisles for 17 years and other than the odd crack in the handle i have never had a problem

i have had a set of there vice grips for over 5 years now and they never let me down. i have had cheaper alternatives in the past but they are no where near the stands of the vice grip.

The Only Irwin tool purchase I made was a set of chisels in a handy little pouch. Best chisels I have used. It’s not something I use all the time but use them occasionally when cutting in security locks and they out perform the cheaper ones I have purchased.

Got a few bits from Irwin, always good quality. The marked chisels are very good and wouldn’t buy any other chisel now. Price is pretty reasonable aswell

Use a few of there tools. Handsaw are decent. I recently used there 7mm diamond tile drill bit. Works great on porcelain tiles have only drilled around 10 holes so far

I own a few pairs of grips and wire cutters they are very Reliable and are priced very Reasonably I don’t k ow what else to say about the brand but I can’t moan about them.

They have some good quality tools plyers and saws and chizles are very good I have a few of there tools the plyers are good but are now at the stage where they require a lot of wd-40 and sand paper to keep serviceable

A staple go to for chisels and clamps. I have a large number of clamps (although never enough). The chisels are good quality and clamps are yet to suffer slippage.

The good old Irwin saw always has a home in my van!

Marple chisel set also exceptional quality, they just need some Japanese style flush cutting saws now to complete the range.

The clamps are made to last and will out perform any cheap alternative ten times over, I have put them under some serious pressure and was shocked how well they held.

I have started to buy more iron tools as the more I have and use them the more impressed I am. The quality of the tools is seems to be from a higher price bracket that You actually pay. Would recommend

Had loads of Irwin bits over the years, always seem to do the job well enough and last long enough to make them worth getting. I’ve had my trusty Irwin knife for what seems like forever.

I have had a few Irwin tools over the years I still have some clamps which do an excellent job and work fine. Great build quality and heavy duty clamps.

Good tools, I own various tools, the chisels are a good quality, the clamps do exactly what you need them to and if you can get one of the 20 piece flat bit sets they are great value

I own the Irwin chisel set and some of there one hand clamps.
Chisels are great but of kitchen, work really well, stay sharp for ages.
Clamps work well easy used, moved and hold wood in place as they should. Been out in all weathers and still going strong.

Not got many Irwin tools but the wood chisels are great quality and would definitely buy again and consider buying of hand tools from them although some tools seem quite expensive

Been a fan of Irwin for a while now. Never really had to use their customer service as no real product faults I can think of. New clamps system is a nice improvement.

Dont use a large amount of the tools that irwin offer in my trade. However, always use them for saws and wood chisels etc... Good strong brand.

We using many different tools and we have using them indoor and outdoor and we have no problem with them very highly recommend from our best team jms

I have several Irwin tools. The main ones I use are the tin snips and the nail pinsers. both have comfortable grips and are easy to use. The pinsers are sometimes a little sharp and can sometimes cut the heads off of small nails I'm trying to pull out.

Have some of the adjustable grips and I find they are better than the usual pump grips and don't slip so easily,the mole type grips are good as well,well put together and robust,can't fault them

Cant really comment on customer service as I haven't had to use it. I actually got a free set of Chisels from a well known kitchen supplier. I find the chisels to be robust and good quality, keeping a sharp edge too. Value for money mine were free so that's good value

So I use the 17 piece flat bit set, usually buy them at Christmas to save a fortune, £18 for 17 bits! Bargain and razor sharp to boot, wont use anything else!