Milwaukee Power Tools C12 PC-0 Compact Pipe Cutter 12V Bare Unit
The Milwaukee C12 PC Pipe Cutter has a high-performance 500 rpm motor that cuts 12mm copper pipe in less than 3 seconds. It has an all-metal sealed front end for water protection that is rust and corrosion resistant.
The pipe cutter has an auto locking cut mechanism that cuts installed copper tubing with as little as 37mm clearance. Auto adjusting jaws automatically adjust to the pipe size, and a built-in LED light illuminates the work surface.
The C12 PC features REDLINK™ overload protection electronics to deliver excellent system durability. A fuel gauge displays the remaining battery charge state.
Specifications:
Voltage: 12 Volt.
Copper tube capacity: 12 - 28mm.
Cutting speed: 500 rpm.
Minimum space for tube cutting: 80mm.
Length: 360mm.
Weight: 1.5kg.
Batteries and charger NOT included.
Number reviews: 16
Overal rating: 5
Review for Milwaukee Power Tools C12 PC-0 Compact Pipe Cutter 12V Bare Unit by Uk Plumbing And Heating
13th February 2022
These are grate for lots of fast cuts like for scrapping pipe and it's grate that it Cuts three different sizes but for day to day cutting I don't recommend as it leaves such a big bure and you Carnt always get it in tight spaces
Review for Milwaukee Power Tools C12 PC-0 Compact Pipe Cutter 12V Bare Unit by B H heating solutions
23rd May 2021
Well I’m on my 3rd in two years the first one died after 6 weeks the second the metal fin on the inside snapped off and this one one isn’t none to good either won’t cut 15mm only 22mm and you have to take it on and off few times for it to do that this is my first milwaukee product and not impressed at all can’t see the hype I will say one good thing it the battery seems to let decent amount of tome apart from that not impressed at all! I don’t recommend
Review for Milwaukee Power Tools C12 PC-0 Compact Pipe Cutter 12V Bare Unit by Central Heating And Plumbing Solutions
20th May 2021
Good bit of kit , strong and durable . It’s a bit cumbersome and heavy though , really quick at cutting through pipes but not good in tight spots and expensive when a hand slice takes a few more turns to cut through .
Review for Milwaukee Power Tools C12 PC-0 Compact Pipe Cutter 12V Bare Unit by D A Childs Joinery
6th April 2021
A very handy piece of kit when removing old kitchens. Put the jaw over the pipe, pull the trigger and after a few spins job done. It does need a bit more room to get the pipe into the jaw than a standard pipe slice but it is so much quicker.
Review for Milwaukee Power Tools C12 PC-0 Compact Pipe Cutter 12V Bare Unit by JRS Plumb And Heat
12th March 2021
Very very handy addition to the tool kit especially if, like myself, you do a lot of install work it just cuts down the time of cutting out old pipework.
Cuts fairly close to the wall, no spiralling and always a clean cut.
Review for Milwaukee Power Tools C12 PC-0 Compact Pipe Cutter 12V Bare Unit by Michael Frith Plumbing
13th February 2021
Great addition to my toolkit particularly when ripping out, build quality as expected from Milwaukee, good battery life & cuts fairly close to wall
Review for Milwaukee Power Tools C12 PC-0 Compact Pipe Cutter 12V Bare Unit by Agps
5th February 2021
A good tool for when ripping out. Not a bad price either I bout mine when it first came out so paid a bit more but have seen them at goid prices about, alot of people I have heard have problems with cutting 15 but it seems to be fine with me.
Review for Milwaukee Power Tools C12 PC-0 Compact Pipe Cutter 12V Bare Unit by Gary North plumbing And Heating
5th February 2021
Great piece of kit. Takes a little bit of getting used to but if I have to use my stand pipe cutter or pipe slice it feels uncomfortable. Good battery life
Review for Milwaukee Power Tools C12 PC-0 Compact Pipe Cutter 12V Bare Unit by SmartPipe Plumbing Services
29th January 2021
Really good bit of kit, handy for ripping out large amounts of copper. Really fast a saves time which is great as save you money. Highly recommend.
Review for Milwaukee Power Tools C12 PC-0 Compact Pipe Cutter 12V Bare Unit by J R Rayner Plumbing Services
24th January 2021
Arguably one of the best tools in my tool bag. Saves me a bundle of time when I’m installing large diameter pipework like 28mm and is certainly a lot less effort than doing it by hand.
Not so easy to use when cutting 15mm pipe as it tends to skip if you don’t position it correctly but it’s just a case of getting used to to tool
Review for Milwaukee Power Tools C12 PC-0 Compact Pipe Cutter 12V Bare Unit by Bear Gardens and Construction
20th January 2021
Lovely tool to use definitely takes some getting used to if you buy one I would recommend you practice on some scrap copper first before using on finished work
Review for Milwaukee Power Tools C12 PC-0 Compact Pipe Cutter 12V Bare Unit by BP Clews Energy Services
22nd December 2020
Good bit of kit, just don’t get it wet,can be a bit fiddly on 15mm if not quite located in the machine correctly,battery run time is good,would definitely buy again.
Review for Milwaukee Power Tools C12 PC-0 Compact Pipe Cutter 12V Bare Unit by Ellesmere Group
17th December 2020
Iv only had this item for a week. So far Iv found it to be very robust, cuts copper tube very easily. For the price it’s definitely worth it.
Review for Milwaukee Power Tools C12 PC-0 Compact Pipe Cutter 12V Bare Unit by Jake Matthews Property Development and Management
15th December 2020
GREAT DEAL BY EXPERT TRADES
Only had this delivered last week and haven’t had a chance to properly test yet, but the quality of this tool is brilliant. This is my first Milwaukee tool (I’m a Makita man) definitely did not disappoint.
Review for Milwaukee Power Tools C12 PC-0 Compact Pipe Cutter 12V Bare Unit by Kw plumbing services
10th December 2020
One of the best things we’ve brought we are doing a lot of big products and it makes things easier for taking old pipework out to get started.
Review for Milwaukee Power Tools C12 PC-0 Compact Pipe Cutter 12V Bare Unit by Gas Eco Heat
10th December 2020
Best tool I’ve ever used, I use it all the time when doing heating system conversion, there is lots of pipes to cut out from loft and airing cupboard, this tool makes the job so easy and pipes are quickly cut to desired lengths so is easy to bag it and take it to the van.
Great tool definitely recommend to all heating and plumbing guys out there.
:)
Number questions: 1
Asked on 16th March 2023 by Domestic Gas Heating Engineer
Milwaukee have the market covered with this They seem to be the only OEM to produce this type of tool! I want Makita to make this Can anyone tell me if there is a Makita version?
Answered on 11th April 2023 by Ian Winnard Heating & Plumbing
Not to our knowledge, why not buy this and see how good it is, no more hurting wrists and knuckles caught on brick work hard materials. Must have had this machine over 5 years. Ease of use, light to see your mark on pipe. Magnifying viewing window that’s comes out for cleaning ( only just seen this a few weeks ago by my son. Get one with charger and battery., unless you have a Milwaukee set. The product is brilliant. Seems to be lots of tools being stolen so recommend going down the Milwaukee range where you control the tools from speed to where it’s used and if it gets stolen just turn it off. Useless to the thieves.
