Armeg Acceler8 Holesaw

Bits and hole saws from armeg are some of the best valued out there (besides maybe Bosch). Good quality, durability and price. Need to invest in a whole set really.

I’ve been using Armeg acceler8 holesaws for just over a year, they are absolutely brilliant for sheet metal. Specifically good for metal trunking and distribution boards. They drill a very neat hole and do not over-size like most other normal holesaws. Cost could do with being lower as it’s a consumable item, but careful use ensures we get our money’s worth from them.

The best hole set I have had yet. Great for distribution boards, cut fast and don't fall in hole after cutting it. Would definitely recommend.

These are great little hole cutters. Perfect for cutting out neat holes in distribution boards. Will eat through that steel no problem at all!

A great hole cutter. Nice and small it fit in to small areas and can also be used in my smaller drill I keep in my tool bag unlike others with a larger fitting arbour. Cuts neatly and stays sharp for ages!

The thinner blades cuts down drill time and creates a much cleaner cut in metal. The shorted shank helps get you into tight spaces. Have recently gone and bought all the sizers available. Worth the wedge !

Great quality product that has proved its worth time and again. Really fast clean cut, frequently used to cut gland holes in metal clad fuseboard and delivers every occasion, happy to recommend to anyone with the need for it

Brilliant hole saws as I'm forever wasting time digging out metal from my saws. Also the expanded base means no more follow through into cables when drilling holes in existing consumer units every electrician should have this in their drill box!

I really love these holesaws. Nothing gets through faster and they're built to last if you look after them. Need to get myself the full set.

these hole saws are great , really like them I have a few different sizes , I wouldn't be without them I've tried the cheaper alternatives and they don't compare .

Great product used all the time to cut in consumer units and back boxes but something needs to be done on grubbing screw on side it does becomes loose very easy

just brilliant for cutting out holes in consumer units. cuts through the metal casing like a knife through butter. And the spring pushes the cut out away without any trouble.

Bought a triple set 20mm, 25mm and 38mm. Great set. Cuts with ease. Handy spring on drill bit to remove waste. Only 4 star for build because spring can ping off.

Simply put best hole saw for cutting panels you can buy. The design means they will only go In so far stops you ramming a hole saw into a cable. Don’t use for plastic or wood

Love the Armeg range, high quality at a really high price. Saves a lot of time and the holesaw's last a long time. Only downside is the price.

good cutter only thing I would say is not really good with Pvc, tendency for pvc to get stuck in the cutter...................................

Love these especially when hole cutting into metal trunking with existing live cables installed as they don’t penetrate to far in as the lip stops that from happening.

These holesaws are brilliant, make drilling into sheet metal a dream, very well designed. I just wish changing the arbour was easier if you snap it (by been clumsy not poor quality) as I have a few hooesaws with hundred more holes left in them with broken arbours

A very expensive piece of kit if only last a few girls used it on modular buildings and would often go through three and one house when they were brand-new they will be brilliant at drilling more as soon as the drillbit snapped you can’t replace it so have to get a new one or use a different drillbit then put the Also back in very inconvenient but If drilling through Sheetmetal once or twice then really good

These are very good for hard plastics and ceramic materials but was disappointed with metal cuts even with cutting compound, they are only recommended for 1 to 2mm sheet steel as well.

These are brilliant. They cut through metal consumer units in no time at all. And with the spring to push out the circle makes for easy cleaning!! Too notch!!!

Reccomended to me by a sparkie. So took it with a pinch of salt. But I can say. I'm really impressed with these. Could do with abit more variation in sizes. But great little drill bits.

These where recommend to me I must admit I was sceptical but they have proved me wrong mine are about six months old and still as sharp as the first time I used them

Awesome little cutters, I’ve got the 20,25,32mm flies through metal cu’s and Gal box’s. I use cutting compound with mine and they are lasting very well. One think tho the little spring on the 20mm went funny but I told um at Elex and they gave me a free one.

Used theses for the first time yesterday and they are the most fantastic hole saw I’ve every used so sharp and no need to clean the hole saw out again

These are the business. Got the set of three (20mm,25mm32mm) and I won’t use anything else of that size. The cut is superb, extremely clean and fast. Plus you don’t go through to the chuck end once through. Great product

Here we go again Armeg just a great product so quick and easy to use they have just got it right so simple to us and change a great spring for ejecting the waste

By far the most amazing holesaw I’ve ever owned. I have no idea how I’ve lived without this. Ease of use! It can be used on trunking that has Live cables within as the hole saw stops after it penetrates. It’s so far drilled around 340 holes!

Good product got a set of these a few weeks ago been used a few times and found they were very good better than my normal hole saws no need to hoke out the cut piece afterward as just ejected automaticly and make my job quicker and less of a pain. I would recommend them to anyone.

Great piece of kit. So much better than a traditional hole saw. Have easily cut 100 holes with mine and its still sharp as the day I bought it. More expensive than other holesaws, but with the speed of cut and longevity of sharpness, it's definitely worth the money.

Build quality is good great feels robust enough to do the job. Ease of use is great. It will fit in any combi drill and impact driver. Features a spring around the pilot drill which pushes out the waste from inside the hole saw. Value for money is good though a little expensive. But after using you will see it pays for itself in time saving.

Bought one of these as left my starett on another job, very quick to cut through sheet steel and leaves a cleaner edge. Like the idea that they can be used in a impact driver. There a bit pricey but will have to see how long it lasts.

Brilliant holesaws to use on sheet metal particularly on the new AMD3 consumer units. Very quick cut nice clean holes with minimal sharp edges. Only downside is they cost on average £15 a holesaw