C.K. Magma Technician's Tool Case

Sorry but this let me down zips broke but it was just too heavy, it looked good initially but now at the back of the van also rather expensive there is more choice now

Bit pricey for what it is, the zippers either snap off or lose teeth, whatever you look for normally always works its way to the bottom but the one thing you can guarantee is that youll find a padsaw before anything else.

Had one of these but have traded it out for a tool tote its a great bag but would be more useful to keep tools for a specific job like testing struggle to get bigger items in it

As with all tool bags its all about the task and ease of use.
When servicing, inspecting and testing this bag has all the features you need to store everything for the job in hand. No more searching for small tools everyone has a place and is easy to find.
Good quality and built to last

I use this technicians tool case every day for servicing. It's the perfect bag and you'll not regret buying one. The middle compartment fits a u gauge, sock and see. And a gas analyser

I had one of these for a few years and worked well, I prefer this setup to a toolbox as you have easy access to all your tools, the zips are robust and only issue I had is the bottom was fabric and became worn after a year

Very good bag to keep all your servicing and electrical tools in.
Plenty of pockets and space in the bag both sides.
Sturdy rubber bottom keeps the bag stood up and doesn't collapse down like some others.

Great tool bag with plenty storage, make sure you get the version with the rubber bottom as the fabric one wears a hole in the corners not to mention isn't waterproof. So if you're in a wet plant room or outside you can't put bag down. Had mine 3 years I've replaced it as my main bag now use to carry all My braising equipment together. Would reccomend

I got this case as a gift with alot of hand tools etc. I got to say it is an absolute beauty to have if your a spark, very good to keep your 2nd fix tools in it

I have had this case for over 3 years now. I use it as my electrical testing kit fitting test instrument, leads, and adaptors in the middle section with hand tools in either side. After frequent use it is still clean tidy and rip free. The zips still close tightly and the tool holsters are still all strong and intact. Great quality and big enough without being too big that when full it becomes too heavy to carry around.

A very well made bag by CK. I found it a-bit too big for my day to day needs and not easy to carry along with other tools. I much prefer a back pack style tool bag. However you can get lots of tools inside it.

Excellent all round tool bag, loads of pockets and storage. Had mine for 4years now, used daily for all my jobs and still going strong. Would recommend to anyone looking for a durable professional tool bag.

Build quality is generally very good as it doesn't tend to Rio from 5 years of hard use. The zips however are jammed half way on both sides. I think there could be improvement made to the features thinking of additional tools or a padded pouch for laptop or tablet.

One of my longer standing tool bags, used for a number of years now, needs a bit of room to open it up fully, i seem to take stuff out the side compartments and at the end of the day chuck it all in the middle, so i do end up sorting it out regularly, not a bad bit of kit

I remember looking at this product thinking how much I wanted one for a longtime so I decided to buy it and after one year of having it I’m thinking of changing it already. It’s fault for me is not being big enough I’ve seen some people say it’s ok if you don’t over fill which tbh I haven’t but even still I find myself thinking it’s more hassle than it’s worth.

Had this bag in the past and found it a good quality bag maybe a little on the pricey side but since going to a backpack style I wouldn’t go back to this style bag

Had a couple of these. Other than the zips failing Build quality is fairly good. It’s got so many compartments which is good. As long as you don’t cram too many tools in you should be fine. I’m an service electrician and get majority of the day to day tools in.

Bought this bag to keep all my electrical tools and testing kit in. It fits everything in and makes it easier to take everything to site. Only downside is it’s quite heavy even empty.

I all ways wanted one of these bags, so when I bought it my expectations where high. 3 weeks into owning one and the zips had broken!!!
Now in the garage collecting dust.

I have one of this product, , i am a engineer, best bag ever , highly recommended, easy to use and store your tool , and easy to get to with ease ,

excellent for maintenance jobs and keeping everything you need organised and all in one place. doesn't feel cheap quality either well worth the money

Excellent for the price if I'm only doing small repairs or servicing. Good for hand tools and laptops if needed on the job. Boiler servicing these things are a must

a very decent and sturdy bag and great for keeping your tools organised. the real downfall of these bags though are the zips they seem to snap in half where the metal fastener joints the plastic bit. so i now have a bag with 2 zips that only open from one direction.

Outstanding toolbag, a place for everything that I have. Got it on offer and was quite surprised at how good it was, the only problems I've had are- the carry handle snapped on me and a couple of the zips have broken, bur apart from that an overall brilliant bag

Fantastic product. I’ve had two only because I ran over one! . The bag was knackered but all of my tools were intact. Must have bag for service engineers!

Really good bag. I like my tools to be in place every time. Neat and tidy. Well made tough bag. Easy to clean. Store loads in there

This is a perfect tool bag for those that like to keep everything in its place and know where everything is making it simple to get what you need.

I have used these bags for about 15 years now probably on about my forth one now.
Current one has the hard base which has lasted better and still going strong. I would definitely buy again as just love the setup for organising tools.

The classic sparks manbag has plenty of room to organise all your shiny red and yellow tools used to to perform the dark art and a nice sized centre section which is meant I think for storing paperwork and laptops but is actually used as a dumping area for stray screws, wagos and ,more importantly, all the tools ,that were previously nicely set out in the side panels, when you want to get to the pub on Friday. I love my magma bag would highly reccomend

The magma c.k tool bag, what abit of kit, my day to day tool bag all full tools nice shoulder pad and a wide strap so it don’t cut into you!

Great case to us can be stored away, great to keep in the van. Would even be handy for use at home when needed.

Affordable service / electrical bag, lots of storage and space for all the needed tools. Comes in 2 sizes which is a plus, shame about the zip Quality of zips, just don’t overload

I bought this bag for storing everything to do a boiler servicing in and lots of pockets for screwdrivers etc not good if your in a tight space though, one of the zips broke after a couple of months so use it for holding odd bits on the van.

We use this case for our electrical gear, I find it has ample storage and works really well for what we need with an internal laptop holder for allowing certificates to be generated on the computer and sent straight away via email or printed.

Bought this bag for servicing but not very good quality on the zips etc holds alot of gear but bag is to compact.

I have had one, zips break in minutes, the size and accessibility is horrendous unless you only have a small amount of kit. stiff and awkward case. I now use mine for meters and have a tool box too

Not the best case. The zips don't last long. Storage is very good and getting at tools is easy with room for everything you need day to day. For the price though it should be better built and last longer.

Great toolbag I've had a few now over the years. Great design and can fit loads in them. Only downside is if you over load them the zips can split

Hardwearing with loads of different storage options.
Well padded to protect delicate stuff like laptops or digital equipment. I use mine to store lock related stuff like picks, locks, tools etc. A bit on the pricey side but still worth the money

I have had 3 of these bags over the years and loved them for organising all my tools. Plenty of compartments and a large centre compartment. You can get loads in this bag and that is probably the reason the zips failed on all 3 bags. Probably me to blame also for this as I tended to cram it pretty full. Would say the zips should be up to taling the strain though...

Not a bad case , good for keeping everything organised. The only issue is eventually the shoulder strap catch seems to break, however this could be due to too much weight!! Overall a great case

I own 1 of these case and xcellet bit of kit , good build quality , fair priced , would recommend, Has lots of storage space

Good bag use for test kit very durable and rugged plenty of pockets and space to keep all your tools and bits and bobs would recommend to anyone

Love my CK bag, I no longer lose any tools! Most Iv paid for a tool bag but it’s worth it, every time I pack up, I know if something is missing now! Only down side is the strap did snap on me and hand to get another!

Great tool bag that is really well laid out however I’ve purchased a few these now and every time the zip has come away.

Had a number of these bags over the years and found them to be very handy, robust bags. Lots of pockets and elesticated cuffs to hold tools but is let down by the Zips which have failed on all the bags I've had. They last longer if you can control the number of tools that get stuffed inside them.

Had this sag now for a number of years very happy with its proformance helps keep tools organised, mine not got the hard base which they offer in the newer ones but it's held up well with the use it's had. Would like to see the shoulder strap alittle more padded and maybe a electrical tape bar fitted to it somewhere

There not really bad but not 100% need to be bit stronger if you fill the sides it squashes the top part and makes it hard to find stuff in the middle, the zip can be a weak part and need to take care of them and not to over load at all I paid £35 for each of mine and had about 2 years so not bad but I've do look after them but I can see why others have issues

I have to be honest, this is not a bad tool bag but the design of the pockets is poor, if you put any pointed tools (which is most tools) they pierce through with a short time, my recommendation would be to double line the pockets? Only my view, overall not a bad bag

bag was brilliant for around 7months then the zips started breaking thenfew weeks after the strap snapped on the side. still have it on the van tho and bought another so over all a good back just need heavier graded zips

Great tool bag ideal for how I worl. Looks good and holds a lot of tools in many sections. I would be lost without it

Better than the old blue ck bag, stronger zips, get as a service bag gets a bit heavy as I don't clean it out often enough that's my fault though, when is breaks I would buy another.

Great bag used for carrying service tools for boiler. I have filled it a bit to much and the zips bust. But the quality of the bag is brilliant.

Very useful case for servicing. Enough storage space for most common tools required. Nice layout also.

Best tool case I have had pittey I over fill it so onley get about 2 year from bag befor zips give up

After a year use the pads on the straps started to go. Also the zip attaching to the bag started to fall apart. Would expect it to last for year considering the money you pay for it

Good all-around bag holds tools where i want them and a middle section for forms etc. Only gripe I have is the shoulder strap catch broke after a week the spring and pin came out of the catch.

Am on my 3rd one in 10years. Early Blue model not as good. Great tool bag for keeping tools tidy. Know where everything goes so helps me not to lose tools. If buying make sure you get the Plus model as more robust

Been using mine for around a year now as a breakdown/ service bag. Stitching and zips are still fine. Enough room for all the essentials, loops for screwdrivers could be bigger.

Great bag bit zips always go and stiching doesn't last too long
Value for money is okay but could do with a better build quality

Good product. Great for a breakdown engineer. Had 3 in last 3 years. Would recommend. Great value for money

Picked one of these up last year as a guy I was working with had one and it seemed like a useful accessorie!
I ordered one off of the net as price was good, it arrived and I started to load in my tools etc, only problem is you soon use up the pockets/holders for tools and some of the others are useless, so I was left with load of tools which didn't fit in which is no good to man or beast! So mine remains in garage still wrapped unused!
If your just doing electrical testing or prefer to keep your testing tools separate then it may be ok for you as you can fit a tester in middle pocket and then use the other compartments for a small amount of screwdrivers and side cutters, plyers

Good tool bag I've had two of these weak points were the zips but that probably because I was overloading it.

Handy bags ideal for service and breakdowns.

I use one of these bags for my flue gas analyser, it's superb for my servicing needs. It is excellent for light items and very light to carry. It has document pockets and save for everything you will ever need

Very good technitions back..also a brilliant center pouch to carry paperwork and certs..Brilliant value for money amd well built

Verry good had mine over a year no issues. Plenty of storage places and well built

Great bag for smaller jobs, fits plenty in it and is easy to carry around from place to place

Great bag loads of different compartments for all sorts of tools

I've been using this bag for about two months and I find it hard work. It has been very well built but it just weighs way to much.

I also find that it can be awkward trying to get tools out and once you've dropped the sides to remove your tools, it takes up to much room.

I don't think I'd bother buying this bag again.

Good bag but not great for gas/heating engineers as nowhere to put long screwdrivers.

Zips let this bag down as they break within 4 months of using it on a daily basis.

Wouldn't be with out mine loads of room and keeps things nice and organised.

Must have for any spark loads of pockets and plents of center room

Loved the first one that much I bought a second

Good tool bag more for a sparks then a heating engineer.

Great tool bag loads of storage Surprisingly hard wearing as well